oil seal types

What do TC, TCN, TCD, TB and SA mean on oil seals? Learn the structure, application and difference of each oil seal type with this practical guide.

If you have ever received an oil seal quotation, you have seen codes like TC, TCN, TCD, TB or SA. These letters are not random — they describe exactly how the seal is built. Understanding them helps you order the right product and avoid costly mistakes.

How Oil Seal Type Codes Work

Each letter describes one component of the seal:

  • T = rubber-covered (fully enclosed in rubber)
  • C = with a garter spring (the small coil spring that keeps the lip pressed against the shaft)
  • N = metal case, rubber covered on the OD only
  • D = double lip (main lip + dust lip)
  • B = metal case exposed on the outer diameter
  • S = single metal case, no rubber coating

The 5 Most Common Types

TC — Fully Rubber-Covered, Single Lip with Spring

The best-selling oil seal type worldwide. The rubber outer layer provides an excellent static seal in the housing bore, and the spring-loaded lip seals the rotating shaft.

Applications: engine crankshafts, wheel hubs, gearboxes.

TCN — Metal Case with Rubber-Coated OD, Double Lip

Same as TC but with a dust lip that blocks dirt, sand and water — ideal for off-road and agricultural equipment.

Applications: tractors, harvesters, construction machinery, truck wheel hubs.

TCD — Fully Rubber-Covered, Double Lip

Combines the rubber-covered OD of TC with the double-lip protection of TCN. The premium choice for dirty, wet environments.

Applications: agricultural machinery, mining equipment, outdoor machinery.

TB / BA — Metal Case Exposed

The metal outer diameter is visible (not rubber-covered). Cheaper, and easier to install in some housings, but less effective in the bore sealing.

Applications: industrial gearboxes, electric motors, pumps.

SA / SC — Basic Single Lip

A simple, economical seal, usually without rubber coating on the OD.

Applications: low-speed, low-pressure applications such as washing machines, small motors.

Conclusion

For most automotive applications, TC is the answer. For dusty outdoor work, choose TCN or TCD. When in doubt, send NTO your old seal or the size code, and our engineers will match it within 24 hours.